If you've just finished a concrete project such as pouring a driveway or perhaps your new garage floor, don't let it be exposed to the elements without protecting it first. The best option is to use a concrete sealer, especially if your work is decorative and costs more than the usual project.
The sealer will make your concrete impenetrable as a fantastic finish coating and protectant. Water, regular traffic (foot or vehicle) and chemicals can damage and deteriorate your concrete causing it to weaken and crack. You can prevent this from happening in a few simple steps.
1. Measure the area you need to seal so you can get the right amount of sealant
2. Do some careful surface prep work by making sure its clean and free of all debris, stains and grease. If necessary use a high power washer to get a deep down clean
3. Wet the concrete surface
4. Apply a cleaning solution such as bleach
5. Dry the surface completely
6. Stir the sealer to make sure its completely mixed, do not shake it as the resulting air bubbles will cause bubbles in the coating
7. Apply a thin even layer to the surface of the concrete
8. Allow it to dry completely
9. Reapply the sealer for a second coating. Dry again.
Usually this is enough for a beautiful protective finish, but be sure to read the instructions that came with your product to ensure you are following their exact steps to obtain the protection and beauty you need.
Another reason to make sure you do a perfect job the first time is that removing concrete sealer can be extremely difficult and the materials required are extremely hazardous. One condition to be watchful of is a condition of frosted sealer, which is when there is a layer of air between the sealer and the concrete. The air allows light to diffuse differently and it gives the concrete a frosted appearance. This is less than desirable and you would want to remove the sealer and start over. Leaving it frosted would detract from the beauty and protection and decrease its value depending on how large an area it is.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น